济宁12人圆餐桌价格 电动桌遥控器学习

仿木酒店家具选购要注意-佛山岚慧家具有限公司

Pay atntion to the selection of furniture for imitation wood hols - Foshan Lanhui Furniture Co., Ltd

仿木酒店家具选购要注意：据了解，在目前的酒店家具市场，木酒店家具因为款式新颖、色彩鲜艳、木纹清晰等优点已经成为酒店家具类别中的大类产品。再加上产品价格比较适中，越来越受到消费者的青睐。专家建议，消费者在购买木质酒店家具的时候，了解和掌握木酒店家具的技术要求和区别其优劣，是正确选购木酒店家具的有效方法。

Atntion should be paid to the selection of imitation wood hol furniture: It is understood that in the current hol furniture market, wood hol furniture has become a major cagory of hol furniture products due to its advantages such as novel styles, bright colors, and clear wood grain. In addition, the product price is relatively modera, and it is increasingly favored by consumers. Experts suggest that when consumers purchase wooden hol furniture, understan and masring the chnical requirements and distinguishing the advantages and disadvantages of wooden hol furniture is an effective method for selecting and purchasing wooden hol furniture correctly.

 

 

 

注重表面质量  木酒店家具中的人造板道造主圣以R}1花板、中密度纤维板等人造板为基材，表面饰以三聚氰胺、PVC,木质薄木和纸质木纹等覆贴面，仿木纹形的花纹清晰自然，光滑平有着良好的视觉效果和手感。选购酒店家具时主要看家具用料表面的板材是否有戈U痕，压痕、鼓泡、脱胶起皮和胶痕迹等缺陷。

Emphasizing surface quality, the artificial board in wooden hol furniture is mainly made of R} 1 patrned board, medium density fiberboard, and other artificial boards as the substra. The surface is decorad with melamine, PVC, wooden veneer, and paper wood grain, with a clear and natural imitation wood grain patrn, which is smooth and has a good visual effect and feel. When purchasing hol furniture, the main focus is on whether there are defects such as scratches, indentations, blisrs, peeling, and glue marks on the surface of the furniture marials.

 

 

木酒店家具在制作中是将成型的板材经过裁锯、装饰封边、部件拼装组合而成的。看人造螂壑进进的制作质量主要看其裁锯质量，边、面装饰质量和板件端口质量。板材在裁锯中对板块部件的平直度、垂直度、对角度都有质量要求，一般来说板材的裁锯技术在每米0.01毫米以内达到精度要求的板材裁锯后边廓平整、对角度好，制成家具后就不会出现板块倾斜的现象。

Wood hol furniture is made by sawing, decorating and sealing the formed boards, and assembling the components in the production process. The production quality of artificial cockroach grooves mainly depends on their cutting quality, edge and surface decoration quality, and board port quality. In sawing, there are quality requirements for the flatness, verticality, and angle of the board components. Generally speaking, the sawing chnology of the board meets the accuracy requirements within 0.01 millimers per mer. Afr sawing, the edge profile of the board is flat and the angle is good, and there will be no tilting of the board afr making furniture.

 

 

 

 

边、面装饰主要看其装饰部件上涂胶是否均匀，粘结是否牢固、修边是否平整光滑，零部件旁板、门板、抽屉面板等下口处等可视部位端面是否封边处理，装饰精良的板材边廓上摸不出粘结的痕迹。拼装组合主要看钻孔处企口是否精致、整齐，连接件安装后是否牢固，平面与端面连接后T形缝有没有间隙，用手推动有没有松动现象。

The edge and surface decoration mainly depends on whether the adhesive on the decorative components is evenly applied, whether the bon is firm, whether the trimming is flat and smooth, and whether the visible parts such as the side panels, door panels, drawer panels, etc. have edge sealing treatment on the end faces. The edges of the well decorad board cannot be traced for bon. The assembly combination mainly depends on whether the groove at the drilling hole is exquisi and neat, whether the connecting parts are firm afr installation, whether there is any gap between the T-shaped joint afr connecting the plane and end face, and whether there is any looseness when pushed by hand.

门、抽屉的分缝是否间隙过大，一般要求规定为1.5mm至2.Omm之间，门和抽屉的开启推拉是否灵活自如等。  注重金属件、塑料件的质量  

 

 

 

 

木酒店家具中常采用金属件、塑料件作为紧固连接件，所以金属件的质量也决定了木酒店家具内在质量的好坏。金属件要求灵巧、光滑、表面电镀处理好，不能有锈迹、毛刺等，配合件的精度要高。塑料件要造型美观，色彩鲜艳，使用中的着力部位要有力度和弹度，不能过于单薄。开启式的连接件要求转动灵活，内部装有弹簧的要松紧适当，这样家具在开启使用中就会平稳、轻松，无摩擦声。  注意主要尺寸

Check if the gap between the door and drawer joints is too large, and the general requirement is between 1.5mm and 2.0mm. Check if the opening and pulling of the door and drawer are flexible and free. Pay atntion to the quality of metal and plastic parts. Metal and plastic parts are ofn used as fasning connectors in wooden hol furniture, so the quality of metal parts also dermines the inrnal quality of wooden hol furniture. Metal parts require dexrity, smoothness, good surface electroplating treatment, no rust, burrs, etc., and the accuracy of the mating parts should be high. Plastic parts should have a beautiful appearance, bright colors, and the applied parts should have strength and elasticity during use, and should not be too thin. The opening type connector requires flexible rotation, and the inrnal spring should be approprialy tighned, so that the furniture will be stable, easy to open and use, without friction sound. Pay atntion to the main dimensions

木酒店家具目前市场上主要以成套卧房家具和酒店家具为主。另外还有多功能的影视电器柜等产品。其家具的主要尺寸〔即功能尺寸)国家标准均有规定要求。如大衣柜规定挂衣柜内的空闻深度应大于等于S30-m,挂长衣的挂衣棍上沿至底板上表面闻距应大于等于140omm,桌类家具规定高度为58Qmm至7GQmm,其中写字桌的中间抽屉下沿至地面高度的中间净空高应大于等于Ss0mm,

The current market for wooden hol furniture mainly consists of comple sets of bedroom furniture and hol furniture. In addition, there are multi-functional film and levision electrical cabinets and other products. The main dimensions (i.e. functional dimensions) of its furniture are specified in national standards. If it is specified in the wardrobe that the air depth inside the wardrobe should be grear than or equal to S30-m, the distance from the top edge of the clothes hanging stick to the surface of the bottom pla should be grear than or equal to 1400mm, and the height of table furniture should be 58Qmm to 7GQmm. Among them, the middle clearance height from the bottom edge of the middle drawer of the writing desk to the ground height should be grear than or equal to Ss0mm,

、ture.