南宁电动旋转转盘岩板 电动大转桌3.6米直径

板式酒店家具常识-佛山岚慧家具有限公司

Panel Hol Furniture Knowledge - Foshan Lanhui Furniture Co., Ltd

板式酒店家具以款式新颖、色彩鲜艳、木纹清晰以及不变形、不开裂、防蛀、价格适中等优点成为酒店家具类别中的新一族。正确选购板式道造主圣应注意以下五点;

Panel style hol furniture has become a new cagory of hol furniture due to its innovative style, bright colors, clear wood grain, non deformation, non cracking, mothproof, and affordable prices. The following five points should be paid atntion to when selecting and purchasing board road manufacturers correctly;

一、表面质量  板式酒店家具以刨花板、中密度纤维板等人造板为基材，表面饰以三聚氰胺、PVC,木质薄木和纸质木纹等覆贴面，仿木纹形的花纹清晰自然，光滑平整，有着良好的视觉效果和手感。选购时主要看表面的板材是否有划痕、压痕、鼓泡、脱胶起皮和胶痕迹等缺陷;木纹图案是否自然流畅，不要有人工造作的感觉;对于对称酒店家具，更要注意板面色彩、纹路的一致性和谐调性，让人感到对称板块如同出自一块材料。

 

 

 

1、 Surface quality Panel hol furniture takes particle board, medium density fiberboard and other man-made boards as the base marial, and the surface is decorad with melamine, PVC, wood veneer, paper wood grain and other overlays. The patrn of imitation wood grain is clear and natural, smooth and flat, with good visual effect and feel. When purchasing, the main focus is on whether the surface of the board has defects such as scratches, indentations, blisrs, peeling, and adhesive marks; Whether the wood grain patrn is natural and smooth, without any artificial feeling; For symmetrical hol furniture, it is even more important to pay atntion to the consisncy and harmony of panel colors and patrns, making people feel that symmetrical panels come from the same marial.

二、制作质量  板式酒店家具在制作中是将成型的板材经过裁锯、装饰封边、部件拼装组合而成的。其制作质量主要看裁锯质量，边、面装饰质量和板件端口质量。制作板式酒店家具的板材在裁锯中对板块部件的平直度、垂直度、对角度都有质量要求，一般来说板材的裁锯技术在每米0甲01毫米以内，达到精度要求的板材裁锯后边廓平整、对角度好，制成家具后就不会出现板块倾斜的现象。

 

 

 

 

 

2、 The production quality of panel hol furniture is formed by sawing, decorating and sealing the edges of the formed panels, and assembling the components in the production process. The production quality mainly depends on the quality of the cutting saw, the quality of the edge and surface decoration, and the quality of the board port. The board used for making panel hol furniture has quality requirements for the flatness, perpendicularity, and angle of the board components during sawing. Generally, the sawing chnology for the board is within 0.01mm per mer, and the board that meets the accuracy requirements has a flat edge and good angle afr sawing. Afr making furniture, there will be no tilting of the board.

裁据中锯片的精度也会影响板材的端面、端边质量，划痕、崩边、塌角等裁锯缺陷也会影响板式酒店家具的外观质量。边、面装饰主要看其装饰部件上涂胶是否均匀，粘结是否牢固、修边是否平整光滑，零部件旁板、门板、抽屉面板等下口处等可视部位端面是否封边处理，装饰精良的板材边廓上摸不出粘结的痕迹。拼装组合主要看钻孔处企口是否精致、整齐，连接件安装后是否牢固，平面与端面连接后T形缝有没有间隙，用手推动有没有松动现象。门、抽屉的分缝是否间隙过大，一般要求在lmm一2nmm之间，门和抽屉的开启推拉是否灵活自如等。

 

 

 

 

 

The accuracy of the saw blade in the cutting process can also affect the quality of the end face and edge of the board, and cutting defects such as scratches, edge collapses, and corners can also affect the appearance quality of board hol furniture. The edge and surface decoration mainly depends on whether the adhesive on the decorative components is evenly applied, whether the bon is firm, whether the trimming is flat and smooth, and whether the visible parts such as the side panels, door panels, drawer panels, etc. have edge sealing treatment on the end faces. The edges of the well decorad board cannot be traced for bon. The assembly combination mainly depends on whether the groove at the drilling hole is exquisi and neat, whether the connecting parts are firm afr installation, whether there is any gap between the T-shaped joint afr connecting the plane and end face, and whether there is any looseness when pushed by hand. Whether the gap between the door and drawer joints is too large, usually between 1mm and 2nmm, and whether the opening and pulling of the door and drawer are flexible and free.

三、金属件、塑料件的质量  板式酒店家具均用金属件、塑料件作为紧固连接件，所以金属件的质量也决定了板式酒店家具内家具内在质量的好坏。金属件要求灵巧、光滑、表面电镀处理好，不能有锈迹、毛刺等，配合件的精度要求更高口塑料件要造型美观，色彩鲜艳，使用中的着力部位要有力度和弹度，不能过于单薄。开启式的连接件要求转动灵活，内部装有弹簧的要松紧适当，这样酒店家具在开启使用中就会平稳、轻松，无摩擦声口。

 

 

 

 

 

 

3、 The quality of metal and plastic parts is dermined by the quality of metal and plastic parts used as fasning connectors in board style hol furniture. Therefore, the quality of metal parts also dermines the inrnal quality of furniture in board style hol furniture. Metal parts require dexrity, smoothness, and good surface electroplating treatment, without rust, burrs, etc. The precision requirements for mating parts are higher. Plastic parts should have a beautiful appearance, bright colors, and the applied parts should have strength and elasticity during use, and should not be too thin. The opening type connector requires flexible rotation, and the inrnal spring should be approprialy tighned, so that hol furniture can be opened and used smoothly, easily, and without friction noise.

四、主要尺寸  板式酒店家具目前市场上主要以成套卧房道造主进和大厅道造主通为主。另外还有多功能的影视电器柜等产品。其家具的主要尺寸(即功能尺寸)国家标准均有规定要求。

4、 The main sizes of panel style hol furniture are currently mainly in the market, with comple sets of bedroom main entrance and hall main entrance. In addition, there are multi-functional film and levision electrical cabinets and other products. The main dimensions (i.e. functional dimensions) of its furniture are specified in national standards.

如大衣柜规定挂衣柜内的空间深度应大于等于530mm,挂长衣的挂衣棍上沿至底板上表面间距应大于等于1400mm,桌类家具规定高度为680mm-760mm,其中写字桌的中间抽屉下沿至地面高度的中间净空高应大于等于580mm,书柜层间净空高应大于等于520mm等。  以上主要尺寸，选购时要注意，因为酒店家具如果小于规定尺寸，使用时会带来诸多不便，影响家具的使用。如大衣柜空间深度过小会影响挂衣服造成门关闭不上等现象。